| |
1. Measure brake pedal height in a starting position. |
| 2. For adjustment of height of installation of a pedal of a brake remove the switch of a stoplight and weaken a lock-nut on a pusher of the vacuum amplifier of brakes. |
| 3. Turn of a pusher adjust height of installation of a pedal of a brake and tighten a lock-nut. |
| |
|
|
4. Install the switch of a stoplight and measure distance between an emphasis of a pedal of a brake and the case of the switch of a stoplight.
|
5. For adjustment of position of the switch of a stoplight weaken a lock-nut on the switch and, rotating a vyklyuchvtel of a stoplight, establish the required gap and tighten a lock-nut.
|
6. Press a brake pedal by small effort and measure distance from a starting position of a pedal to situation at which you will feel resistance. |
|
|
|
| 7. Start the engine, press a brake pedal against the stop and measure distance from a pedal to a floor. |
8. If the minimum height of a pedal, in the pressed situation is less than demanded, check the brake system for existence of leaks or other damages. |
