96acc5c1

10.4.1. Adjustment


When moving the lever of the choice of transfers from neutral it has to move to other provisions smoothly and be fixed accurately. At the same time the indicator of position of the lever has to specify the correct position of the lever. If the indicator does not show the correct position of the lever, adjust a cable of the choice of transfers as follows.

PERFORMANCE ORDER
1. Lift the car and record on supports. Remove mudguards.
2. Weaken a nut of fastening of a hinged bolt of a cable of the choice of transfers on the lever of the choice of transfers of the transmission.
3. Move the lever of the choice of transfers against the stop down, then return back it on 2 provisions and establish in neutral situation.
4. Install the lever of the choice of transfers in interior of the car to neutral situation.
5. Tighten a nut of fastening of a hinged bolt of a cable of the choice of transfers on the transmission lever.
6. Check operation of the transmission in each position of the lever of the choice of transfers. At start of the engine the starter has to work only in position of PARK or NEUTRAL of the lever of the choice of transfers.