| 1. Install the hydrotransformer on an entrance shaft of the transmission. |
| 2. Being careful, install the transmission on the engine, at the same time turn the hydrotransformer so that openings under a bolt in a gidrotransfor to Matyora and a plate of the drive were combined. |
| 3. Fix the transmission on the engine by bolts, having tightened them the required moment. |
| 4. Being careful, slowly install the transmission with the engine in a motor compartment of the car. |
| 5. Fix the transmission on the engine by bolts, having tightened them the required moment. |
| 6. Being careful, slowly install the transmission with the engine in a motor compartment of the car. |
| 7. Establish support of the power unit and fix them by bolts. |
| 8. Further installation is made in the sequence, the return to removal. |
| 9. Fill in cooling liquid in the cooling system, engine oil in the engine and oil in the transmission. |
