96acc5c1

11.4.3. Installation

PERFORMANCE ORDER
1. Apply a thin film of high-temperature lubricant on the internal surface of the release bearing, a vent of a main shaft and the directing plug of the release bearing.
2. Apply a thin film of high-temperature lubricant on the places of a fork of switching off of coupling contacting to the release bearing, a hairpin with a spherical tip and a pusher.
3. Install the release bearing on a coupling switching off fork.
4. Install the release bearing on the directing plug in a forward part of the transmission. At the same time pass a fork of switching off of coupling through an opening in a coupling case. Establish a fork of switching off of coupling on a hairpin with a spherical tip before fixing it.
5. Apply a thin film of high-temperature lubricant on the forward party of the release bearing contacting to a diaphragm spring of a press disk.
6. Further installation is made in the sequence, the return to removal.