| 1. Lift a back part of the car and record on supports. Remove the corresponding back wheel. |
| 2. Check that the emergency brake is completely released and remove a brake disk or the brake drum. |
| 3. On models with drum brakes remove brake shoes and disconnect a cable of the emergency brake from the lever on a brake shoe. On models with back disk brakes remove brake shoes of the emergency brake and disconnect a cable of the emergency brake from the lever on a back brake shoe. |
| |
|
4. Unscrew two bolts of fastening of a cover of a cable to a brake board.
|
5. Under the car unscrew bolts of all fastenings of a cable of the emergency brake. |
| 6. Remove the central exhaust pipe. |
|
7. Unscrew tightening bolts and take forward parts of back cables of the emergency brake from clips. |
| 8. Disconnect forward parts of back cables of the emergency brake from the compensator. |
| 9. Installation is made in the sequence, the return to removal. |
|
10. Adjust a cable of the emergency brake. |
