| 1. On models with a body "sedan" remove a back seat and side finishing. On models with a body "station wagon" remove a back of a back seat and side finishing. |
| 2. Lift a back part of the car and record on supports. Remove back wheels. |
|
|
3. On models with a body "station wagon" disconnect a spring of the limiter of pressure (LSPV) from the lower lever. |
| 4. Remove a brake hose from an arm of a back rack. |
| 5. Unscrew draft of the stabilizer from a back rack. |
| 6. Support the fastener of a back nave by a jack. |
|
7. Weaken two nuts of fastening of a back rack to the nave fastener. |
|
8. Unscrew three nuts of the top fastening of a back rack to a body. |
| 9. A jack lower the fastener of a nave and an okonchatel but unscrew two nuts and take two bolts of fastening of the lower part of a back rack to the nave fastener. |
| 10. Take a rack of a back suspension bracket from under the car. |
| 11. Check of a state and dismantling of a rack of a back suspension bracket is made in the same way, as well as racks of a forward suspension bracket. |
|
|
12. You make installation of the top support of a back rack according to the drawing. |
