96acc5c1

13:10. Rack of a back suspension bracket

Removal

PERFORMANCE ORDER
1. On models with a body "sedan" remove a back seat and side finishing. On models with a body "station wagon" remove a back of a back seat and side finishing.
2. Lift a back part of the car and record on supports. Remove back wheels.
3. On models with a body "station wagon" disconnect a spring of the limiter of pressure (LSPV) from the lower lever.
4. Remove a brake hose from an arm of a back rack.
5. Unscrew draft of the stabilizer from a back rack.
6. Support the fastener of a back nave by a jack.
7. Weaken two nuts of fastening of a back rack to the nave fastener.
8. Unscrew three nuts of the top fastening of a back rack to a body.
9. A jack lower the fastener of a nave and an okonchatel but unscrew two nuts and take two bolts of fastening of the lower part of a back rack to the nave fastener.
10. Take a rack of a back suspension bracket from under the car.
11. Check of a state and dismantling of a rack of a back suspension bracket is made in the same way, as well as racks of a forward suspension bracket.


12. You make installation of the top support of a back rack according to the drawing.