96acc5c1

13:14. Fastener of a back nave

Removal


Fastener of a nave of a back suspension bracket
1 – wheel speed sensor;
2 – fastener of a back suspension bracket;
3 – support;
4 – nave;
5 – brake disk;
6 – sealing ring of round section

PERFORMANCE ORDER
1. Lift a back part of the car and record on supports. Remove a back wheel.

2. Remove the back brake drum or a support and a brake disk. On models with back brake drums of an otsoyeda to Nita a brake tube from the working brake cylinder.

3. Remove a back nave.
4. On models with back brake drums remove a brake board from the nave fastener. On models with back disk brakes remove a brake board and knot of the emergency brake from the nave fastener. Using a soft wire, tie a brake board to a spring of a back suspension bracket.
5. On models with anti-blocking system unscrew the wheel speed sensor from the nave fastener.
6. On models with a body "station wagon" unscrew a nut of fastening of a spring of the restrictive valve (LSPV).
7. Weaken bolts of fastening of a rack of a back suspension bracket to the fastener of a back nave.
8. Unscrew bolts of fastening longitudinal and cross levers to the fastener.
9. Finally unscrew bolts of fastening of a rack of a back suspension bracket to the fastener of a back nave and remove the fastener of a back nave.