96acc5c1

13:15. Steering wheel

Removal

Preventions

In the presence in the code radio receiver against theft, before an accumulator detachment, check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.

You make further actions not earlier than in 90 sec. that the condenser of the airbag was discharged completely.

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Establish forward wheels for the movement directly forward. Remove caps from two parties of a steering wheel and unscrew two screws of fastening of a safety cushion to a steering wheel.
3. Take the safety cushion block from a steering wheel and disconnect the electric socket from the block.
4. Disconnect the electric socket of a sound signal and system a cruise control.
5. Note the provision of a nave of a steering wheel in relation to a steering shaft and unscrew a nut of fastening of a steering wheel.
6. Using a special stripper, remove a steering wheel from a shaft.