96acc5c1

13:18. Steering transfer

Removal


Elements of fastening of steering transfer
 
1 – forelock;
2 – protection of the right forward wing;
3 – stabilizer of cross stability;
4 – protection of the left forward wing;
5 – forelock

PERFORMANCE ORDER
1. Establish forward wheels for the movement directly forward. Lift a forward part of the car and record on supports. Remove wheels. Remove an engine mudguard.

2. Install the corresponding container under steering transfer and disconnect from steering transfer, the giving and returnable tubes and close them traffic jams.
3. Note mutual position of the lower universal hinge and an entrance shaft of steering transfer. Unscrew lower tightening a bolt of an intermediate shaft.
4. Remove spherical hinges of tips of steering draft from rotary fists.
5. Unscrew bolts of fastening of plugs of the stabilizer of cross stability.
6. Unscrew nuts of fastening of steering transfer, raise the stabilizer of cross stability and take bolts of fastening of steering transfer.
7. Remove an intermediate shaft from an entrance shaft of steering transfer and take steering transfer from the right side of the car.