| 1. Lift a forward part of the car and record on supports. Remove forward wheels. |
| 2. Unscrew three bolts and remove protection of the right and left forward wings. |
| 3. Unscrew drafts of the stabilizer from the lower levers of a forward suspension bracket. |
| |
|
| 4. Unscrew drafts of the stabilizer from the stabilizer of cross stability. |
5. Unscrew bolts of fastening of the clips fixing the stabilizer of cross resistance to the lower frame. |
| 6. Remove a reception exhaust pipe. |
| 7. Unscrew bolts of fastening of steering transfer. |
| 8. Remove steering transfer and take the stabilizer of cross stability from under the left wing. |
| 9. Check the stabilizer for lack of wear and mechanical damages. Pay special attention to a condition of plugs of installation of the stabilizer. |
|
10. Check a condition of the spherical hinge of draft of the stabilizer. For check of a condition of the spherical hinge establish draft of the stabilizer in a vice, screw a nut on a pin of the spherical hinge and, using a dynamometer key, turn 4 times a pin of the spherical hinge and, turning the 5th time a pin of the spherical hinge, define torque which needs to be put for a provorachivaniye of a pin of the spherical hinge. Torque size for a provorachivaniye of a pin of the spherical hinge has to make from 0,5 to 10 Nanometers. Otherwise replace draft of the stabilizer. |
