| 1. Remove a weight wire from the accumulator. |
|
2. Open a forward door. Using a screw-driver edge as the lever, remove a decorative overlay of the internal handle of opening of a door. |
|
|
3. On models with a manual window regulator completely close a window and note a window regulator handle arrangement. Release a bracket of fastening and remove the handle. The bracket of an osvobozhd etsyatsya if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, hook on a bracket and release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shlits. |
|
|
|
| 4. Take the clamps of fastening of an upholstery of a door to a door located on door upholstery perimeter. |
|
5. Unscrew the screws fixing a door armrest. |
| 6. Using the screw-driver with a wide edge, separate a door upholstery from a door. |
|
7. After separation of an upholstery of a door from a door disconnect electric sockets and remove a door upholstery from the car. |
|
8. If it is necessary, remove a protective film from a door. |
| 9. Installation is made in the sequence, the return to removal. |
