96acc5c1

15:24. Rear-view mirrors with the electric drive


Arrangement of elements of management of external rear-view mirrors with the electric drive
 
1 – left rear-view mirror;
2 – right rear-view mirror;

3 – switch of provision of a mirror;
4 – connecting block No. 1


Removal of the switch of adjustment of provision of an external mirror

 


Use of a digital ohmmeter for check of a condition of contacts of the switch of a mirror

 


The switch of adjustment of provision of a mirror and condition of contacts at various provisions of the switch

 

For management of the provision of an external rear-view mirror it is used in each mirror on two electric motors.

Adjustment of provision of an external rear-view mirror with the electric drive is possible only after inclusion of ignition.

For check of operability of the engine, turn on the switch and listen whether there is a sound of the working engine.

If the engine works, but the mirror does not move probably there is a defect of the drive in a mirror.

If the mirror does not move and the engine does not work, check a safety lock in the block of safety locks located on the left side under the dashboard.

If a safety lock whole, remove a decorative overlay of a combination of devices for access to a back part of the switch of mirrors. Without disconnecting the electric socket from the switch, include ignition and check tension on the switch. Tension has to be present at one contact of the socket. If tension is absent, check an electric chain between the block of safety locks and the switch.

If tension moves to the switch, disconnect from it the electric socket and check serviceability of the switch (see rice. Removal of the switch of adjustment of provision of an external mirror, rice. Use of a digital ohmmeter for check of a condition of contacts of the switch of a mirror, rice. The switch of adjustment of provision of a mirror and a condition of contacts at various provisions of the switch).