15.7.2. Replacement

Multipurpose switches of a steering column
1 – casing of a plait of wires;
2 – fastening bracket;
3 – ball;
4 – spring;
5 – switch handle;
6 – lighting switch;
7 – basis of switches;
8 – screen wiper switch;
9 – knot of the spiral drive

1. Remove a steering wheel.
2. Unscrew screws of fastening of the multipurpose switch.
3. Release clamps and remove the switch together with a plait of wires from a steering column.
4. Unscrew screws of fastening and remove the tel demanded a rekey from the basis of switches (see rice. Multipurpose switches of a steering column).
5. Take contacts of wires of the replaced switch and socket. From a forward part of the socket insert the thin narrow screw-driver and wring out a fixing short mustache on contact and for a wire take contact from the socket.
6. From a back part of the socket insert contacts of a new rekey of a tel into the socket and move them before accurate fixing.
7. Further installation is made in the sequence, the return to removal.