96acc5c1 The camshaft operating inlet valves


1. Turn the camshaft in such situation that the adjusting pin was placed on 80–115 ° from the vertical plane to the left.

2. Unscrew bolts of fastening of a forward cover of the bearing of the camshaft and uncover the bearing with condense with a telny ring.
3. Unscrew bolts of fastening of covers of bearings distribute a telny shaft No. 1, 3 and 4 on a half of a turn for each pass before full unscrewing of bolts. Remove the 1st, 3rd and 4th cover of bearings of the camshaft.
4. Gradually and consistently unscrew bolts of fastening of a cover of the bearing No. 2 of the camshaft and uncover.
5. Remove the camshaft from a head of the block of cylinders.