96acc5c1

2.10.3.1. The camshaft operating inlet valves

PERFORMANCE ORDER
1. Oil pushers pure engine and establish them into place. Check that adjusting laying of ustan of Lena in pushers.
2. Grease necks of bearings and cams of the camshaft with pure engine oil.


3. Install the camshaft in a head of the block of cylinders so that the adjusting pin was turned on 80 ° from the vertical line to the left.
4. Apply a thin film of sealant on the interfaced surface of a forward cover of the camshaft according to the drawing.
5. Establish covers of bearings of the camshaft according to tags, and shooters have to be directed to a forward part of the engine.
6. Gradually and consistently in the order shown in the drawing tighten bolts of fastening of covers of bearings of the camshaft.
7. Establish a new oil sealing ring of the camshaft.