96acc5c1

2.13.3. Installation

Arrangement of laying of a cover of the oil pump and external rotor in the case of the oil pump

PERFORMANCE ORDER
1. Using the screw-driver, take an old sealing ring of a rotor of the oil pump and establish a new sealing ring.
2. Replace a forward sealing ring of a bent shaft.
3. Establish consolidation of a cover of the oil pump and an external rotor of the oil pump in a flute of the case of the oil pump.
4. Grease a shaft and establish an internal rotor in a cover of the oil pump, then establish a pulley and fix by a nut, having tightened it the required moment.
5. Install a cover on the case of the oil pump and fix by two long bolts.
6. Oil the piston of the safety valve pure engine and install all elements of the valve in the case of the oil pump.
7. Install new laying of the oil pump on the block of cylinders.
8. Install the oil pump on the block of cylinders and fix by bolts.
9. Further installation is made in the sequence, the return to removal. Fill in in the engine oil to the required level.