2.14.2. Installation


1. On models with the mechanical transmission check a flywheel for wear from coupling and a condition of teeths of the gear screw.

2. On models with the automatic transmission check a condition of the drive of the hydrotransformer and a gear wreath.

3. Clear the interfaced surfaces of a flywheel and a bent shaft. Establish a flywheel according to earlier put tags and screw up fastening bolts.
4. Record a flywheel from a provorachivaniye and finally tighten bolts of fastening of a flywheel.
5. Further installation is made in the sequence, the return to removal.