2.4.1. Removal


In the presence in the code radio receiver against theft, before an accumulator detachment, check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.

1. Remove a weight wire from the accumulator.
2. Disconnect a hose of ventilation of a case of the engine from a cover of a head of the block of cylinders.
3. Remove high-voltage wires from spark plugs.
4. Unscrew two bolts and remove the top casing of a gear belt.
5. Unscrew the nuts fixing a head cover to pipes of spark plugs.
6. Being careful, uncover a head of the block of cylinders. If the cover was pasted to a head of the block of cylinders, do not enter the lever or the screw-driver between a cover and a head of the block of cylinders. The wooden hammer easy blows bring down a cover from a head of the block of cylinders.