96acc5c1

2.5. Inlet collector

Removal

Preventions

In the presence in the code radio receiver against theft, before an accumulator detachment, check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.

2. Merge cooling liquid from the cooling system.

3. Weaken a collar of fastening of a hose of the air filter to the case of a throttle and remove the top part of a casing of the air filter.
4. Mark wires, hoses and a cable connecting an inlet collector to other units of the engine.
5. Being careful, remove a plait of wires from an inlet collector.
6. Remove all thermal protection and arms and unscrew bolts of fastening of an inlet collector to a head of the block of cylinders.
7. Remove an inlet collector from the engine.