96acc5c1

2.6.1. Removal


Preventions

In the presence in the code radio receiver against theft, before an accumulator detachment, check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.


PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Disconnect a wire of the sensor of oxygen and its fastening. If replacement of a final collector is required, remove the oxygen sensor.
3. Unscrew bolts and remove the top thermofilter from a final collector.
4. Grease bolts and nuts of fastening of a final collector with oil, fuel or brake fluid.
5. Disconnect the catalytic converter from a final collector.
6. Remove an arm of support of a final collector (some models have two arms) and the lower thermofilter.
7. Unscrew nuts of fastening and remove a collector together with laying.