96acc5c1

3.11.3.2. The cam-shaft operating final valves of the right head


The rings removed with from the camshaft operating final valves

1 – spring persistent ring;
2 – gear wheel;
3 – spring ring


PERFORMANCE ORDER
1. Oil pure engine cams, necks of bearings and persistent surfaces of gear wheels of the camshaft.
2. Install the camshaft in a head of the block of cylinders so that tags on a gear wheel (two points) were directed to the camshaft operating inlet valves.
3. Establish covers of bearings of the camshaft so that shooters were directed to a forward part of the engine.
4. Tighten bolts of fastening of covers of bearings distribute a telny shaft, turning them on 1/3 turns for each pass to the sequences, presented in the drawing.
5. Unscrew an additional bolt from a camshaft gear wheel.
6. Similarly remove and install camshafts on the left head of the block of cylinders.
7. Establish a gear belt.
8. Further installation is made in the sequence, the return to removal.