| 1. Remove the oil pallet. |
| 2. Take off a gear belt and the lower single pulley. |
| 3. Remove a pulley of a bent shaft. |
|
|
4. Unscrew bolts and pick up the oil receiver phone with the mesh filter. |
| 5. Remove the generator. |
| 6. Unscrew bolts of fastening of the compressor of the conditioner and move the compressor aside, without disconnecting from it hoses. |
|
|
| 7. Unscrew bolts and remove a conditioner compressor arm. |
8. Unscrew bolts of fastening of the amplifier of steering and move it from the oil pump aside. |
|
9. Remove the lower single pulley of a gear belt. |
| 10. Unscrew bolts and remove the oil pump from the engine. |
|
11. Remove sealing laying of round section. Consistently remove a lock ring of the safety valve, a clamp, a spring and the valve. |
|
12. Unscrew 8 screws and uncover the oil pump. |
| 13. Uncover the oil pump and take pump rotors. |
| 14. Clear the interfaced surfaces of the oil pump and the block of cylinders of the engine. |
