| 1. Replace a sealing ring in the case of the oil pump. |
| 2. Install external and internal rotors in the case of the oil pump, at the same time combine adjusting tags on rotors of the oil pump. |
| 3. Apply a thin film of vaseline on the interfaced surface of a cover of the oil pump, install a cover on the case of the oil pump and screw screws. |
| 4. Oil details of the safety valve pure engine and install them in the case of the oil pump. |
5. Clear the surface of the case of the oil pump, interfacing my to the block of cylinders of the engine from oil.
Apply a layer of sealant with a diameter of 2-3 mm on the interfaced surface of the case of the oil pump.
Establish sealing laying of round section in a flute of the case of the oil pump. |
|
6. Combine a groove on an internal rotor of the oil pump with a spline of a bent shaft and install the oil pump on the block of cylinders of the engine. |
| 7. Fix the oil pump by bolts, tightening them crosswise. |
| 8. Establish an oil receiver pipe with new laying and fix by bolts. |
| 9. Further installation is made in the sequence, the return to removal. Add engine oil in the engine. |
