96acc5c1

3.9. Replacement of a forward sealing ring of a bent shaft

Installation of a forward sealing ring of a bent shaft

PERFORMANCE ORDER

1. Take off a gear belt and a pulley of a bent shaft.

2. Cut through an opening in an end face of a sealing ring.

3. Using the edge of the thin screw-driver wound by an adhesive tape take a sealing ring from a nest.
4. Clear a nest of a sealing ring and oil a new sealing ring pure engine.
5. Using a tubular mandrel of the corresponding diameter, establish a sealing ring into place.
6. Establish a pulley of a bent shaft and a gear belt.