4.17. Engine balance of assembly at capital repairs
Assembly of the four-cylinder engine has to be executed in the following order:
– piston rings;– bent shaft and radical bearings;
– pistons and rods;
– back sealing ring of a bent shaft;
– assembly of the balance weight;
– head of the block of cylinders and pushers;
– camshafts;
– gear belt and pulleys;
– casings of a gear belt;
– oil pump;
– oil pallet;
– inlet and final collectors;
– cover of a head of the block of cylinders;
– drive flywheel/plate;
– hinged knots.
Assembly of the six-cylinder engine has to be executed in the following order:
– piston rings;– bent shaft and radical bearings;
– pistons and rods;
– back cover of a bent shaft;
– oil pump;
– oil pallet;
– heads of the block of cylinders;
– camshafts and pushers;
– gear belt and pulleys;
– casings of a gear belt;
– cover of a head of the block of cylinders;
– inlet and final collectors;
– drive flywheel/plate;
– hinged knots.