| 1. When dismantling a head of the block of cylinders note details for their installation on the places. |
|
|
|
| 2. Before removal of valves prepare the place for storage of the corresponding details. |
3. Using the device for compression of a spring of the valve, squeeze each spring and remove crackers from a valve end face. Remove the device for compression of a spring and take a plate springs and a spring. Flat-nose pliers, being careful, take a maslootrazhatelny cap from a valve rod. |
| 4. When the spring of the valve is removed, and the cup of a spring does not remove ся from crackers, it is necessary to strike with the hammer through wooden whetstone a spring cup that will lead to release of crackers. |
| 5. Take the valve via the combustion chamber. Each valve you store in a separate plastic bag together with a plate springs, a spring, a nest of a spring and crackers for their further installation on the places. |
| 6. Similarly remove the others of the valve from a head of the block of cylinders. |
