5.10. Water pump

Models with four-cylinder engines

Arrangement of a bolt of fastening of adjusting draft of the generator

1. Remove a weight wire from the accumulator.


In the presence in the code radio receiver against theft, before a detachment of the accumulator check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.

2. Take off a gear belt and single pulleys.
3. Unscrew adjusting draft of the generator (see rice. Arrangement of a bolt of fastening of adjusting draft of the generator).
4. Unscrew bolts of fastening of the water pump and remove the pump together with laying.
5. Disconnect bypass a cooling system hose from a branch pipe, unscrew two nuts of fastening of a branch pipe of supply of cooling liquid to a heater and uncover the pump.
6. Clear all interfaced surfaces of the water pump.
7. Install the water pump with new laying on the block of cylinders and fix by bolts in the sequence shown in drawings.
8. Install new laying on the thermostat.
9. Further installation is made in the sequence, the return to removal.