96acc5c1

6.13.3. Fuel pressure regulator

6.13.3.1. Replacement


Arrangement of a sealing ring of round section at installation of the regulator of pressure upon the fuel highway

PERFORMANCE ORDER
1. Take off pressure in the fuel highway.
2. Remove a weight wire from the accumulator.

Preventions

In the presence in the code radio receiver against theft, before a detachment of the accumulator check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.


3. Disconnect a vacuum hose from the fuel pressure regulator.
4. Weaken a collar and remove a returnable fuel hose from pressure regulator.
5. Unscrew bolts of fastening of the regulator of pressure and remove pressure regulator from the fuel highway.
6. Using a sealing ring of round section, install the regulator of pressure upon the fuel highway (see rice. An arrangement of a sealing ring of round section at installation of the regulator of pressure upon the fuel highway).
7. Further installation is made in the sequence, the return to removal.