96acc5c1

7.14. Starter


Preventions

In the presence in the code radio receiver against theft, before an accumulator detachment, check that you have connection codes.

On models since 1993 the system of the airbag of safety is disconnected if the accumulator is disconnected for long term. If a control lamp of a safety cushion it lights up and necessary to burn after repeated connection of the accumulator, it is necessary to address in a specialized workshop for maintenance of system.



Starter
 
1 – case of a starter and coupling;
2 – gear wheel;
3 – lock ring;
4 – bearing;
5 – spring;
6 – holder of a spring;
7 – starter case;
8 – obgonny coupling;
9 – spring;
10 – shaft;
11 – traction relay;
12 – spring;
13 – bearing;
14 – gear wheel;
15 – steel ball;
16 – forward bearing;
17 – rotor;
18 – back bearing;
19 – sealing ring;
20 – stator;
21 – sealing ring;
22 – shchetkoderazhtel;
23 – back cover;
24 – dustproof cover;
25 – sealing ring

Starter relay arrangement in the relay block

 


PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Remove the accumulator from a motor compartment.
3. Disconnect and remove the executive block a cruise control from a motor compartment.
4. Disconnect electric wires from a starter and the traction relay.
5. Unscrew bolts of fastening of a starter.
6. Being careful, remove a starter from the engine.
7. Installation is made in the sequence, the return to removal.