96acc5c1

7.6. Ignition distributor

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. Disconnect electric sockets from the ignition distributor.
3. On a cover of the distributor note situation высоковольт a leg of a wire of the first cylinder.
4. Uncover the distributor and turn a bent shaft of the engine so that the rotor of the distributor was directed to the plug of a high-voltage wire of the first cylinder.
5. On the case of the distributor put the tag located opposite to a contact part of a rotor of the distributor.
6. Also note position of the case of the distributor in relation to the block of cylinders.
7. Unscrew bolts and remove the ignition distributor.