9.6.2. Installation

1. Apply a small amount of high-temperature lubricant on the bearing in an end face of a bent shaft.
2. Being careful, install the transmission on the engine and fix by bolts, having tightened them the required moment.
3. Being careful, install the power unit in a motor compartment of the car.
4. Establish support of the power unit and fix them by bolts.
5. Further installation is made in the sequence, the return to removal.
6. Fill in cooling liquid in the engine cooling system, engine oil in the engine and oil in the transmission. Start the engine and check it for lack of leaks.
7. Switch off the engine and repeatedly check the level of cooling liquid and engine oil.